wangqinglin0
标书里的业绩类型是指：投标人以前完成过类似工程建设、设备供应或服务提供业务成绩。招标文件中通常要求投标人具备类似项目的业绩。业绩可以体现投标人自身管理能力、技术能力和公司实力，为招标人选择中标人提供重要参考依据。业绩可以用合同文件、中标通知书、用户评价等相关文件证明。拓展资料标书的定义：标书(bidding documents)是由发标单位编制或委托设计单位编制，向投标者提供对该工程的主要技术、质量、工期等要求的文件。标书是招标工作时采购当事人都要遵守的具有法律效应且可执行的投标行为标准文件。它的逻辑性要强，不能前后矛盾，模棱两可；用语要精炼、简短。标书也是投标商投标编制投标书的依据，投标商必须对标书的内容进行实质性的响应，否则被判定为无效标(按废弃标处理)。标书同样也是评标最重要的依据。标书一般有至少一个正本，两个或多个副本。国际招标书和投标书按国际惯例分为本国版本和英文版本，以英文版本为准。国内招标书一般是以中文版本为准，而中国国内的企业进行国际招标，一般是以英文(或当地语言)版本投标。招标文件中一般注明，当中英文版本产生差异时以中文为准。根据具体标的目的不同还可以进一步细分。如工程类进一步可分施工工程、装饰工程、水利工程、道路工程、化学工程每一种具体工程的标书内容差异非常大。货物标书也一样，简单货物如粮食、石油；复杂的货物如机床、计算机网络。标书的差异也非常大。一般无论工程还是货物的主要内容可分为三大部分：程序条款、技术条款、商务条款。其中又主要包含下列九项内容：1.招标邀请函；2.投标人须知；3.招标项目的技术要求及附件；4.投标书格式；5.投标保证文件；6.合同条件(合同有一般条款及特殊条款)；7.技术标准、规范；8.投标企业资格文件；9.合同格式。
虾球麻麻
国际工程承包是指一个国家的政府部门、公司、企业或项目所有人（一般称工程业主或发包人）委托国外的工程承包人负责按规定的 条件承担完成某项工程任务。国际工程承包是一种综合性的国际经济 合作方式，是国际技术贸易的一种方式，也是国际劳务合作的一种方 式。之所以将这种方式作为国际技术贸易的一种方式，是因为国际承 包工程项 目建设过程中，包含有大量的技术转让内容，特别是项目建 设的后期，承包人要培训业主的技术人员，提供所需的技术知识（专利技术、专有技术），以保证项目的正常运行。 一．工程承包合同的基本内容 招标成交的国际工程承包合同不是采取单一合同方式，而是采取另一种合同方式，这种合同是由一些有关文件组成的，通常称为合同文件（contract documents）。 合同文件包括：招标通知书、投标须知、合同条件、投标书、中标通知书和协议书等。按照国际上通用的"合同条件"，一般包括以下内容： 1．监理工程师和监理工程师代表权责条款 合同中应该规定，发包人须将其任命的监理工程师及时通知承包人，监理工程师是发包人的代理人，在监理工程师中选定监理工程师 代表负责监督工程施工和处理履约中出现的问题。 2．工程承包的转让和分包条款 合同一般规定，承包人未经发包人或其代理人同意，不得将全部合同、合同的任何部分、合同的任何利益和权益转让给第三者。经发包人或其代理人同意，承包人方可把部分工程分包给他人，但原承包人仍对全部工程负责。 3．承包人一般义务条款 根据合同规定，承包人应该负责工程项目的全部设计和施工，并无偿提供为施工所必备的劳务、材料、机器设备及管理知识。 4．特殊自然条件和人为障碍条款 工程承包合同，一般来说履行合同时间较长，在履行合同中，可能会由于特殊自然条件和人为原因给工程的施工带来困难，必须采取 一定的措施才能排除，例如，增加施工机械设备、劳动力、材料等， 这样就要增加承包费用或推迟工程进度。以上问题须经监理工程师或监理工程师的代表确认，发包人才能偿付额外增加的费用或同意工程 延期。 5．竣工和推迟竣工条款 合同中规定竣工时间和标准，工程完成后承包人经监理工程师或其代表验收无误后发给竣工证明，标志着工程项目已全部竣工。如果出现一些特殊情况，如工程变更、自然条件变化、人为障碍使工程延误，承包人经监理工程师同意，可以延长工程的竣工期限。 6．专利权和专有技术条款 承包人或分包人须向发包人提供专利和专有技术，并承担被第三方控告合同范围内专利权为非法、以及专利权被第三方侵犯时的责任； 承包人提供的专有技术，双方应订立保密条款。 7．维修条款 合同中的维修条款是说明维修期限和维修费用的负担问题。维修期限一般是从竣工证书签发之日起计算，一般土木工程维修期为十二 个月。在维修期内，承包人应按监理工程师的要求，对工程缺陷进行维修、返工或弥补等。如果工程的缺陷是由于承包人的疏忽造成，由承包人负担由此而引起的费用。如果由于其他原因造成，由发包人负担费用。 8．工程变更条款 合同签订后，发包人或监理工程师有权改变合同中规定的工程项 目，承包人应按变更后的工程项目要求进行施工。因工程变更增加或减少的费用，应在合同的总价中予以调整，工期也要相应改变。 9．支付条款 支付条款一般规定在合同条件的"特殊条件"之中，主要包括： （1）预付款：工程开工前，发包人应按合同规定支付给承包人一部分预付款，预付款金额一般是合同总价的5-15％以便承包人购置机械设备和采购材料等。 （2）临时结算：发包人每月向承包人支付一次，发包人每月支付的金额应扣除承包人的保留金，保留金通常是每月支付金额的5- 10％左右，但保留金的累计金额达到合同总价款的5％时，就不再扣留，承包人交付的保留金应在工程竣工和维修期满后全部退还给承包人。 （3）支付期限：一般规定，在监理工程师签发给结算单之日起 十五至三十天以内，发包人要向承包人付清费用。 （4）迟付加息：如果发包人不按规定付款，应按工程项目所在国中央银行放款利率加息。 后结算证书之日起三十天内，发包人付清全部价款。 10 ．违约惩罚条款 合同项下的双方当事人在履行合同过程中，可能会出现违约的行为，针对各方违约的情况，分别订立违约惩罚条款。 （1）对承包人违约的惩罚：承包人凡是未经发包人书面同意而 转让和分包承包工程；承包人凡是无正当理由不按时开工；承包人未按合同规定标准准备材料；承包人不听从监理工程师的正当警告；承包人忽视工程质量等，均属承包人的违约行为。对此，发包人有权终止合同，没收承包人的履约保证金或者采取其他必要的惩罚措施。 （2）对发包人违约的惩罚。 凡是以下情况即构成发包人违约：未向承包人按时支付费用；干扰、阻碍或拒绝向承包人签发付款证明；无正当理由中途决定停工，故意制造事端，挑剔和责难承包人等等。 对于发包人的违约行为承包人有权终止合同，发包人须赔偿承包人因准备开工或施工中所有费用的支出和机器设备折旧费用，运输费用等。 除上述合同条款外，还要订立仲裁条款，特殊风险条款等。 二．工程承包合同的招标方式 招标（Tender, Invitation to invite tender） 是一方（招标人）欲出售、购买商品，或欲建设工程项目按一定程序征求应征人， 不经磋商而进行交易的一种方法。应征人按招标人的要求提出具体方案并寄交招标人称为投标（to submit tender 或 submission of tender）国际竞争性招标的程序大致分为如下几个阶段： 1．招标前的准备工作。（1）项目招标委员会的组成。招标委员会应由国家主管部门组织，聘请工程、商务、外汇、法 律等各有关方面的专家组成，负责解决项目招标中所遇到的各种问题， 并具体指导招标工作。（2）招标公告。在进行招标前，应在国内外有影响的报刊上发布招标公告。它包括招标通知和招标广告两个部分。招标通知是指分别送给与项目有关的与所在国建立了外交和商务关系的各国有关部门的书面通知。招标广告是指在国内外有影响的报刊上所刊登的招标广告。 通知和广告的内容应包括：项目名称、项目地点、项目内容概况 、工程范围、索取招标文件的日期、地址及截止日期、招标条件、价 格以及有关事项的咨询单位等。（3）资格预审。资格预审是指对愿意承担招标项目的投标人进行的财务状况、技术能力、资信等方面的预先审查。目的是选择确有承包能力的投标人。（4）制定标底。招标委员会刊登招标广告后，即应准备合同价格，通过项目概算,确定合同的价格水平，亦称为"标底"，是招标委员会掌握的底牌，是绝对保密的。 2．公开招标。公开招标是指招标委员会通知取得投标资格的投标人或刊登广告知悉投标人索取或购买招标文件，邀请其前来投标的招标环节。 3．开标。开标是指招标委员会在规定的日期、时间和地点，将截止日期前 收到的全部投标文件，在所有投标人或其代表在场的情况下，当场拆封投标文件，并公开宣读各投标人的投标条件，以使全体投标人了解各家的标价，这种程序即为开标。 4．评标与决标。开标以后即转入评标阶段。招标委员会将投标文件的标价，及其它条件一一汇集列表，选取其中报价最低的四、五份投标文件，进行 审查、鉴别、比较，直至决定中标单位，这一阶段，是在秘密条件下进行的。决标是根据评标报告及其推荐意见为依据，由招标委员会决定中 标人，同时向中标人发出中标通知书的环节，对未中标的人一般可不通知，或只简单通知××承包人中标即可。 5．签订合同。中标人在接到正式的"中标通知书"后，即应在规定的时间内与工程业主签订工程承包合同。合同先由一方起草，并在该草稿基础上进行磋商，达成一致谅解后签订。 International engineering contracting refers to a country's government departments, companies, enterprises or project owner (usually the owner or contract, said one project) commissioned by the contractor in charge of foreign projects in accordance with the conditions provided for the completion of a project to assume the task. International project is a comprehensive international economic cooperation, international technology trade is a form of international labor service cooperation with a way. The reason why this approach as an international technology trade a way, because of international contracted projects Head construction, contains a large number of technology transfer, in particular towards the end of project construction, contractor owners to train technical staff to provide the necessary technical know-how (patents, proprietary technology) to ensure the normal operation of the project . 1. Engineering the basic elements of contract International engineering contract tendering contracts rather than the adoption of a single contract, but another contract, this contract is formed by a number of relevant documents, and often referred to as the contract documents (contract documents). Contract documents, including: tender notices, tender information, contract conditions, bids, notices and agreements such as the successful bidder. In accordance with internationally, "the terms of the contract" generally include the following: 1. Supervision engineers and representatives of the powers and responsibilities of the terms of supervision engineer The contract should provide that the contract of their appointment shall promptly notify the contractor supervision engineers, supervision engineers contracting agent of the person, in the supervision engineer in selected representatives of supervision engineer is responsible for overseeing construction and dealing with performance problems. 2. The transfer of project contracting and subcontracting provisions General provisions of the contract, the contractor without a contract or their agents may not be all of the contract, the contract any part of any contract transferred to the interests and rights of a third party. By the contract or their agents, contractors, part of the project to be subcontracted to others, but the original contractor is still responsible for all projects. 3. Obligations under the terms of the general contractor According to the contract, the contractor should be responsible for all project design and construction, and provided free of charge necessary for the construction labor, materials, machinery and equipment and management know-how. 4. The special natural conditions and terms of man-made obstacles Project contracts, in general a longer time to perform the contract, in the performance of the contract, may be due to the special natural conditions and man-made reasons for the difficulty of project, certain measures must be taken to rule out the possibility, for example, increase in construction machinery and equipment, labor, materials, etc., so that the contractor is necessary to increase the cost or delay the progress of the project. Subject to the supervision over the issue of engineers or engineers on behalf of the Commissioner confirmed that the contract be able to pay additional fees or agree to an extension project. 5. Completion of the terms and delays in the completion of Completion time stipulated in the contract and standards, the contractor after the completion of works by the supervision engineer or his representative issued after the completion of acceptance to prove correct, marked the completion of the project have been. If there are some special circumstances, such as engineering changes, changes in natural conditions, man-made obstacles delayed the project, the contractor agreed to by the supervision engineer, you can extend the deadline for completion. 6. Terms of patents and know-how Contractor or subcontractor to the contract to provide patent and proprietary technology, and assume by contract the scope of third-party patent rights against an illegal, as well as patent infringement by a third party liability; contractor to provide proprietary technology, Both sides should enter into the terms of confidentiality. 7. Maintenance provisions of Terms of the contract maintenance period is to repair and maintenance costs of the burden. Maintenance period is generally the completion certificate was issued from the date of the general civil engineering for the twelve-month maintenance period. In the maintenance period, the contractor should be the requirements of supervision engineer, the engineering maintenance defects, rework or make up for such. If the project is due to the defects caused by the negligence of the contractor by the contractor the burden of the resulting costs. If as a result of other causes, from contract to bear the cost. 8. Terms of engineering change After the signing of the contract, contract supervision engineer or the right to change the provisions of the contract projects, contractors should be to change the requirements after the project construction. Changes due to increase or decrease in the cost of the contract price should be adjusted accordingly to change the period. 9. Terms of payment Terms of payment in terms of the contract the general provisions of the "special conditions" are, including: (1) advances: the project started before the contract according to the terms of the contract as part of the advance paid to the contractor, the amount of the advance is generally 5-15% of the total contract price to the contractor to purchase machinery and equipment and procurement of materials. (2) The provisional outturn: monthly contract payments to the contractor once the contract the amount of monthly payment should be deducted from contractor's retention, the retention money is usually paid a monthly amount of 5 - 10%, but retention of the cumulative total contract price amounted to 5%, it would no longer be detained, the contractor should be referred to the retention and maintenance of construction works had been completed after the expiration of all returned to the contractor. (3) the payment period: a general rule, the supervising engineers statements issued to date within 15-30 days, contracts were paid to the contractor. (4) late payment interest rates: If the contract is not required to pay the project host country should be the central bank lending rate hike. After the settlement 30 days from the date of the certificate, the contract price were paid in full. 10. Breach of contract penalty clauses Under the contract by both parties in the course of performance of the contract, there may be a breach of conduct, in view of the parties to the case of breach of contract, breach of contract penalty clauses were made. (1) breach of contract on the contractor penalties: Any contractor who, without the written consent of contract and the transfer and sub-contracted projects; contractor any justification does not start on time; contractor did not prepare the contract standard materials; contractor does not listen to the legitimate warning supervision engineer; contractor to ignore the quality of the project are the contractor's default. In this regard, the contract is entitled to terminate the contract, forfeiture of the contractor's performance bond, or take other punitive measures necessary. (2) penalties for breach of contract award. All the following persons will constitute a breach of contract: the contractor is notFor reference
优质英语培训问答知识库
