人工翻译英文

Adhere to the "people-oriented, best use" management philosophy, committed to building internal management and external guarantee business expansion, to be honest, pragmatic, efficient, rigorous, standardized for the purpose, committed to serving small and medium enterprises and individuals, banks and customers of the architecture cooperation between the bridge financing and guarantees to meet customer needs, to help banks to expand their business and risk management for small and medium enterprises or individuals to provide loan guarantees, investment and financing consulting services to achieve the company's "local private financial services star" development ready King.希望对你有帮助。

man-made

Moreover, fromFig. 1(c), it can be此外，fromfig。1（C），它可以found that some of the TiN powders were agglomerated from发现某些锡粉末的团聚fine TiN particulates (Fig. 1(c)). 50 wt.% Al2319 and 50 wt.% TiN精细TiN颗粒（图1（c））。50重量%和50重量%的锡al2319(corresponding to 32.7 vol.%TiN) powders were mechanically（对应32.7体积%的锡）的粉末进行机械blended as feedstocks. For comparison, pure Al2319 coating混合原料。相比之下，纯al2319涂层was also deposited. Al plateswere used as substrates andwere也沉积。铝plateswere用作衬底的sand-blasted prior to spraying.喷砂喷涂之前。The coating cross-sectional structure was observed with观察了涂层的横截面结构optic microscopy (OM) and scanning electron microscopy光学显微镜（OM）、扫描电子显微镜(SEM). The polished cross-sectionswere etched by a solution of（SEM）。光交叉sectionswere通过溶液蚀刻100 ml H2O+3mlHF+6mlHNO3. Estimation of coating porositywas100毫升H2O + 3mlhf + 6mlhno3。涂层porositywas估计performed through metallurgical image analyses using通过金相图像进行分析使用at least 10 cross-sectional micrographs. Vickers hardness至少10的横截面的显微照片。维氏硬度measurement was performed on the polished cross-sections在抛光横截面进行测量using a LEITZ microhardness tester with a load of 200 g and a用Leitz显微硬度计与200克的负载和dwell time of 15 s. More than 15 values from random locations15秒的停留时间。15多值随机位置on the polished cross-section were averaged for calculating在光滑的截面进行平均计算the mean hardness. The coating/substrate adhesive strength平均硬度。涂层/基体的粘结强度was measured using pull-off test (ASTM C-633-79). The commercially利用拉拔试验测定（ASTM c-633-79）。商业available adhesive film (FM 1000), having a nominal可用的胶膜（调频1000），有一个名义上的tensile strength up to 60MPa, was used. The assembled test抗拉强度达到60MPa，使用。组装测试pieceswere tested with a speed of 0.78mm/min using Estotestpieceswere速度与0.78mm/min使用estotest测试50 tensile tester. For each coating, five test specimens were50拉伸试验机。各涂层的试样，五used. The fractured surfacewas obtained through bending the用。发现通过弯曲断裂substrate to peel the coating.衬底剥离涂层。有些词语翻译过来怎么还是他本身啊我是一句一句翻译的